Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Jaguar XE?

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

To remove the door panel of the Jaguar XE, you need to detach the trim around the internal handle and the one located on the side of the door. This will allow you to loosen the screws located underneath.

Next, lift the window switch panel, disconnecting its connector at the bottom. At this point, you can start releasing all the clips securing the panel, which can be completely removed after disconnecting all connectors.

After removal, you can replace the panel with a new spare part.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Replacing Courtesy Light on Jaguar XE 2.2
Replacing Courtesy Light on Jaguar XE 2.2
Jaguar Xe (2015-2024 / MK 1) Today we will discuss the Jaguar XE, a prestigious car from the British group, and specifically how to replace the courtesy light located in the side…
How to Reset the Service Light of the Jaguar XE
How to Reset the Service Light of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) Let's see the procedure to reset the service light of the Jaguar XE: the method is valid for all models around 2016. Get in the car, open the bonnet,…
Where to Find the Fuse Box of the Jaguar XE
Where to Find the Fuse Box of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) To locate the fuse box of your Jaguar XE, you only need a few seconds. Follow these steps. First, park your Jaguar XE safely on a flat surface. Then,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos