Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Courtesy Light on Jaguar XE 2.2

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Side marker bulb

Video tutorial

Today we will discuss the Jaguar XE, a prestigious car from the British group, and specifically how to replace the courtesy light located in the side mirror. Start by carefully removing the glass from the mirror: simply pull and leverage with your hands to unclip it. Now, using a flathead screwdriver, press on the bottom to unclip a tab that holds the courtesy light holder; this will release the entire holder.

Now remove the ceiling light and unclip the bulb by pulling in the opposite direction of the holder, and you're done.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Where to Insert the Physical Key of the Jaguar XE
Where to Insert the Physical Key of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) This guide shows how to open and start the Jaguar XE when the remote is flat. To open the driver's door, extract the mechanical key from the remote b…
Where to Find the Fuse Box of the Jaguar XE
Where to Find the Fuse Box of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) To locate the fuse box of your Jaguar XE, you only need a few seconds. Follow these steps. First, park your Jaguar XE safely on a flat surface. Then,…
Battery Replacement for the Jaguar XE
Battery Replacement for the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) This guide provides instructions for removing and replacing the battery in the Jaguar XE. First, open the boot lid and start by removing the floor pa…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos