Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light in the Jeep Avenger?

Model: Jeep Avenger MK 1 - Years: 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

Short video tutorial, available here, useful to understand the procedure for resetting the service light on the Jeep Avenger. The tasks to be performed, regarding maintenance, are listed in the vehicle's user manual and only after completing them we will be able to reset the warning.

Here is how: hold down the button located on the left end of the steering column lever and simultaneously turn on the instrument panel. A countdown will start and at the end of it we will see the warning light turn off, release the button and turn off the instrument panel.

There you go, the sequence is complete.


Posted on 19 March 2025 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Jeep Avenger?
How do you reset the tire pressure light on the Jeep Avenger?
Jeep Avenger (2022-2026 / MK 1) To reset the tire pressure warning light of the Jeep Avenger, you need to inflate the tires until they reach the recommended pressure value: this pre…
How to Reset the Service Light on the Jeep Avenger
How to Reset the Service Light on the Jeep Avenger
Jeep Avenger (2022-2026 / MK 1) In this tutorial, you will see how to reset the service light on the Jeep Avenger, a very simple and quick operation to perform only after completing…
How to Set the Clock on the Jeep Avenger
How to Set the Clock on the Jeep Avenger
Jeep Avenger (2022-2026 / MK 1) Today's instructions will allow you to adjust the clock on the central display of the Jeep Avenger. First, get inside the vehicle and navigate to the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos