Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Jeep Compass car radio

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Car stereo

See other generations:
Video tutorial

Replacing the radio of the Jeep Compass is a simple and quick operation to be carried out independently. To perform the replacement, we will need to use a star screwdriver, a plastic tool for removing plastics, and the new radio.

We start the radio replacement by inserting the plastic removal tool inside the radio and gently levering it outwards to remove the cover that protects the screen. Using the screwdriver, we remove the screws that secure the screen and then remove the radio, being careful not to damage the cables.

We then disconnect the connectors and connect them to the new radio. We secure the screen with the four screws and snap on the cover.


Posted on 3 May 2025 by ScegliAuto


Related tutorials

How to Calibrate the Compass on a Jeep Compass
How to Calibrate the Compass on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Today, we will explain how to calibrate the compass on a Jeep Compass. The compass is located above the radio instrumentation, so when replacing the …
How to Replace the Radio in the Jeep Compass?
How to Replace the Radio in the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the radio in the Jeep Compass, use a tool to pry off the plastic cover surrounding the radio and climate control. Once the cover is remove…
How to Reset the Radio in a Jeep Compass
How to Reset the Radio in a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video, you will learn how to reset the infotainment system in a Jeep Compass. Sit in the driver's seat, put the gear in neutral, and start th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos