Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

Resetting the service in the Jeep Renegade, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have completed all the scheduled maintenance work.

We start by going inside the cabin, then we insert the key, press the accelerator pedal, and at the same time, turn on the instrument panel. Keeping the pedal in position, we press the brake ten times in a row, turn off the panel, and release the pedal.

At this point, all that remains is to start the vehicle and verify that the reset was successful.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos