Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lambda sensor of a Jeep Renegade 1.6 MultiJet

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Oxygen sensor

Video tutorial

Today we will see how to replace the lambda probe of a Jeep Renegade with a 1.6 MultiJet engine. Let's start the procedure by opening the engine compartment and removing the plastic cover of the engine, once this is done we will immediately see the lambda probe as shown in the video.

We continue the operation by disconnecting the probe cable from the fixing clip that holds it in place and then also disconnecting its connector that connects it to the control unit. Now with a 22mm wrench we can unscrew the old lambda probe and then replace it with a new one following the reverse procedure.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Replacing the Timing Belt on the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's main steps will show you how to remove and replace the timing belt on the Jeep Renegade 2.0 Multijet. First, open the engine bonnet and remov…
How to replace the timing belt of the Jeep Renegade 2.0 Multijet
How to replace the timing belt of the Jeep Renegade 2.0 Multijet
Jeep Renegade (2014-2026 / MK 1, BU, 520) The main steps illustrated in this guide will show us how to disassemble and replace the timing belt of the Jeep Renegade 2.0 Multijet. First, we lif…
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
How to Replace the Timing Belt on a Jeep Renegade 2.0 Multijet?
Jeep Renegade (2014-2026 / MK 1, BU, 520) The video here briefly shows what is required to replace the timing belt on the Jeep Renegade 2.0 Multijet and where in the vehicle the work should b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos