Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located in the Jeep Commander?

Model: Jeep Commander MK 1 - Years 2005-2010
Part: Checks and maintenance

If you own a Jeep Commander and are curious about the location of the OBD2 port, all you need to do is follow the steps outlined in the following guide. First of all, make sure your Jeep Commander is safely parked on a flat surface, then open the driver's side door and shift your attention to the lower left side of the dashboard. At this point, locate the OBD2 port you were looking for, and the procedure is now complete. From now on, you can connect a compatible diagnostic tool to it.

Posted on 25 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Jeep Commander
How to Replace the Air Filter on the Jeep Commander
Jeep Commander (2005-2010 / MK 1) The following video tutorial shows how to independently replace the air filter on the Jeep Commander. The air filter box is located under the front b…
Fuse box diagram of a Jeep Commander
Fuse box diagram of a Jeep Commander
Jeep Commander (2005-2010 / MK 1) Thanks to today's video, we can see all the diagrams of the two fuse boxes inside a Jeep Commander, a model in production from 2005 to 2010. In the v…
Resetting the Service Light on Jeep Commander
Resetting the Service Light on Jeep Commander
Jeep Commander (2005-2010 / MK 1) In this brief video tutorial, you will learn how to reset the service light, specifically the oil change light, on a Jeep Commander, model produced f…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos