Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Jeep Commander?

Model: Jeep Commander MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

Video tutorial

In order to reset the Service light of the Jeep Commander, you need to insert the ignition key into the slot, so that you can turn on the instrument panel: once the panel is on, you can press the accelerator pedal three times all the way down. Once this operation is done, you can release the pedal and you will notice that the Service light has disappeared; once the procedure is completed, you can turn off and on the panel to verify that the reset has been completed correctly.


Posted on 8 March 2025 by ScegliAuto


Related tutorials

Jeep Commander (2005-2010 / MK 1) In this brief video tutorial, you will learn how to reset the service light, specifically the oil change light, on a Jeep Commander, model produced f…
Jeep Commander (2005-2010 / MK 1) If you own a Jeep Commander and are curious about the location of the OBD2 port, all you need to do is follow the steps outlined in the following gui…
Jeep Commander (2005-2010 / MK 1) The following video tutorial shows how to independently replace the air filter on the Jeep Commander. The air filter box is located under the front b…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos