Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Commander
    4. : Service light reset on Jeep Commander

Jeep Commander - Video tutorial

Model: Jeep Commander MK 1 - Years 2005-2010
Part: Checks and maintenance
Operation: Service light reset on Jeep Commander

In this very short video tutorial, we are shown how to reset the service light, or the oil change light, on a Jeep Commander, model produced from 2005 to 2010. The operation is very simple to do and we can do it independently after performing maintenance on the vehicle, but let's see how to proceed immediately. First, turn on the vehicle's ignition to the first position, without starting it, then press the accelerator pedal three times all the way down within ten seconds, after which we will have reset the service.


Posted on 22 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos