Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Side Indicator on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Side marker bulb

In this video tutorial, learn how to remove the side indicator on a Jeep Renegade: a simple and quick process that requires no special tools. First, lift the bonnet of your car and press the entire lamp from the lower side to release it. Then disconnect the electrical connector to fully remove it. The video also shows how to remove the fog lights; in any case, reassemble everything, replacing the bulbs if desired, in the same way shown in the video!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulbs on a Jeep Renegade
How to Replace the Front Indicator Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video tutorial, you will see how to remove and replace the front indicator bulb on a Jeep Renegade, following the instructions below. Firs…
How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
How to Remove the Indicator Light from the External Mirror of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the indicator light from the external mirror of a Jeep Renegade? Follow these steps: use a plastic or rubber lever to pry between the e…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos