Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Engine Light on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Warning light – error code

In this video tutorial, you will learn how to reset the engine light on a Jeep Compass. Before performing any operation, it is necessary to resolve the issue that triggered the light: once done, you can proceed with the reset operation. To reset the light, first, turn on the vehicle's ignition and connect an OBD scanner with the specific software to select the exact make and model of the vehicle and perform the reset procedure. Once completed, disconnect the scanner and turn off the ignition: then check the result.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The manual reset of the engine oil light on the dashboard of your 2021 Jeep Compass is very simple to perform, and in this new mini guide we will dis…
How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
How to reset the oil light on a 2011 Jeep Compass
How to reset the oil light on a 2011 Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Our video tutorials explain how to act independently in the face of a problem with your vehicles. Today's video is about resetting the oil light on a…

    Frequently Asked Questions

    • Compass 2016-2025 - What does the "RPM x1000" light indicate in the Jeep Compass? Read answer
    • Compass 2006-2016 - Why does the start and stop light come on in a Jeep Compass? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos