Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the speaker on Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Door panel
Operation: How to replace the speaker on Jeep Cherokee

Let's see how the door panel is removed to remove the internal speaker. We open the door, unscrew the screws placed in the space of the upper lever of the door opening and the screws under the handle (after removing the plastic screw covers). Unscrew the remaining screws on the door panel and detach the clips for tightening it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We unscrew the tightening screws around the speaker: we replace the speaker with a new one. We carry out the assembly of the panel at the end of the replacement.


Posted on 10 January 2024 by ScegliAuto



Replace the remote control battery of the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Does the battery of the Jeep Cherokee need to be replaced because it is flat? How to do? We open the remote control of the Jeep. We extract the metal
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) The Jeep Grand Cherokee, unlike other car models in the same category, has the battery located in a different location. Specifically, the battery of
Replacing the remote control battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Let's see in this video how to remove and replace the electronic key remote control battery on a Jeep Cherokee and Grand Cherokee. First of all we ta

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos