Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Handle of the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Handle

See other generations:
Video tutorial

These brief steps will show you how to remove and replace the door panel and handle of the Jeep Cherokee. First, open the front door and begin to dismantle and remove the door panel by unscrewing all the side fixing screws and finally disconnecting the handle cable and the electric connector of the window lift button; after that, you can remove the components of the door panel or the window lift motor and its mechanism, as illustrated in the video.

At this point, replace the external handle if necessary, applying the reverse procedure for reassembly!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Replacement of the automatic gear shift knob of the Jeep Cherokee
Replacement of the automatic gear shift knob of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Below we will discover the main instructions that will allow us to disassemble and replace the automatic gear shift knob of the Jeep Cherokee. First,…
How to Remove the External Handle of the Jeep Cherokee?
How to Remove the External Handle of the Jeep Cherokee?
Jeep Cherokee (1984-2001 / MK 2, XJ) To remove the external handle of the Jeep Cherokee, you first need to take off the door panel. This can be done by removing any plastic covers, unscr…
Replacing the Gear Knob on a Jeep Cherokee
Replacing the Gear Knob on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) This brief guide outlines the steps to remove and replace the gear knob on a Jeep Cherokee. First, get into the vehicle and start by removing the gai…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos