Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Shift knob

This brief guide outlines the steps to remove and replace the gear knob on a Jeep Cherokee. First, get into the vehicle and start by removing the gaiter from the gear knob by sliding it down. Next, unscrew the screw on the gear knob, which is located on the sides of the shaft, as shown in the video. Now pull the knob upwards to remove it from the lever; then correctly fit the new knob, securing and tightening the screw on the shaft and attaching the gaiter to the knob!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the automatic gear shift knob of the Jeep Cherokee
Replacement of the automatic gear shift knob of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Below we will discover the main instructions that will allow us to disassemble and replace the automatic gear shift knob of the Jeep Cherokee. First,…
Replacing the Gear Selector Light Bulb on a Jeep Cherokee
Replacing the Gear Selector Light Bulb on a Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Let's see how to replace the bulb that illuminates the gear selector of the automatic gearbox on a Jeep Cherokee. Using a flathead screwdriver, pry a…
The Functioning of the Lighting System in a Jeep Cherokee
The Functioning of the Lighting System in a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) This video explains the functioning of the lighting system in a latest model Jeep Cherokee. As the first step, position yourself in the driver's seat…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos