Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Knob on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Shift knob

Video tutorial

Using a sharp tool, remove the plate above the gear knob where the gears are marked. Once done, unscrew the now exposed nut with a small pliers, given the limited space.

After removing the nut, you can also take off the gear knob. To fit the new knob, even if it is different from the original, the operation is quite similar but in reverse: position the new knob correctly and then screw on the nut. Refit the new top plate by securing it in place, and you're done.

As you can see, this is a very simple operation that anyone can do.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Jeep Renegade
How to Replace the Gear Knob on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's guide will show you how to remove and replace the gear knob on a Jeep Renegade, following the instructions below. First, get into the cabin a…
How to Replace the Gear Knob on Jeep Renegade
How to Replace the Gear Knob on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, we see how to replace the gear knob on a Jeep Renegade. First, secure the vehicle with the handbrake applied; sit in the seat. To carr…
How to Unlock the Automatic Gearbox of a Jeep Renegade?
How to Unlock the Automatic Gearbox of a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To unlock the automatic gearbox of the Jeep Renegade, lift the plastic covering the leather cover of the gear lever using a screwdriver as a lever. O…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos