Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Transmission

Video tutorial

In this video, we see how to replace the gear knob on a Jeep Renegade. First, secure the vehicle with the handbrake applied; sit in the seat.

To carry out this procedure, you will need to obtain a tool kit (online) to unscrew the plate located above the gear knob. Once the plate is detached, remove it and underneath you will find a screw in the knob.

Use a socket wrench to remove the screw in the knob. At this point, detach the knob from the gear stick.

Position the new knob onto the metal shaft of the gear stick. Proceed in reverse to reassemble all the disassembled parts.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Jeep Renegade
How to Replace the Gear Knob on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's guide will show you how to remove and replace the gear knob on a Jeep Renegade, following the instructions below. First, get into the cabin a…
How to Replace the Gear Knob on the Jeep Renegade
How to Replace the Gear Knob on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the gear knob on the Jeep Renegade, you will need: a 10 mm socket spanner, a small screwdriver, a utility knife, and long-nose pliers. The…
Replacing Gear Knob on Jeep Renegade
Replacing Gear Knob on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Using a sharp tool, remove the plate above the gear knob where the gears are marked. Once done, unscrew the now exposed nut with a small pliers, give…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos