Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Shift knob

To replace the gear knob on the Jeep Renegade, you will need: a 10 mm socket spanner, a small screwdriver, a utility knife, and long-nose pliers. The first step is to lift the cover that conceals the screw holding the knob in place. Once this cover is removed, you can unscrew the screw and the knob will come off. Replace it with one of your choice. There are thousands available online, of all types and for all budgets, so you can choose the one you like best. Simply refit it onto the lever, screw the screw back in, and position the cover of the new knob. Job done.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Jeep Renegade
How to replace the gear knob of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's guide will show us how to disassemble and replace the gear shift knob of the Jeep Renegade, following the instructions below. First, we climb…
How to Replace the Gear Knob on Jeep Renegade
How to Replace the Gear Knob on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, we see how to replace the gear knob on a Jeep Renegade. First, secure the vehicle with the handbrake applied; sit in the seat. To carr…
Replacing Gear Knob on Jeep Renegade
Replacing Gear Knob on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Using a sharp tool, remove the plate above the gear knob where the gears are marked. Once done, unscrew the now exposed nut with a small pliers, give…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos