Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light bulb

Open the boot lid and remove the side grille by pulling it from the designated tab. Unscrew the now exposed spring screw. Extract the lamp unit and open it by unscrewing the screws on the rear side. This way, you will have the housing in hand where the various bulbs (reverse, stop light, and dipped beam) are fixed, and you can replace the burnt-out one, whichever it may be. For reassembly, proceed in reverse, refitting the bulb housing into the lamp structure and then refitting the entire unit into the car's location. Screw in the spring screw and you're done.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the rear light on Jeep Renegade
Removing the rear light on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video, we will see how to remove the rear light on a Jeep Renegade, in simple steps. First, open the boot and remove the side plastic cove…
How to Replace the Rear Light Bulbs on a Jeep Renegade
How to Replace the Rear Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
How to Replace Halogen Bulbs with LED Bulbs in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the original halogen bulbs in a Jeep Renegade with new LED bulbs, first open the bonnet and access the rear of the light corresponding to …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos