Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Headlamp

Model: Jeep Grand Cherokee MK 2, WJ - Years 1998-2004
Part: Headlight

Open the front bonnet and unscrew the fixing screw of the headlamp (it is located centrally and is quite long); then, using a large flat screwdriver, lever the headlamp forward and complete the removal by pulling it out manually. Disconnect the connectors and remove the retaining clips which should be applied to the new headlamp (lubricate them before removal to avoid breaking them).
Connect the connectors to the new headlamp, align it in the insertion position, and push it back until it clicks into place; finally, apply the fixing screw. Proceed in the same way for the replacement of the other headlamp and adjust the beam with the appropriate tool.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlamp of a Jeep Grand Cherokee 2
Removing the Front Headlamp of a Jeep Grand Cherokee 2
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this video, you will see how to remove and replace the front headlamp assembly of a second series Jeep Grand Cherokee by following these simple st…
How to replace the front headlamp on a Jeep Grand Cherokee
How to replace the front headlamp on a Jeep Grand Cherokee
Jeep Grand Cherokee (1992-1998 / ZG, MK 1, ZJ) This brief guide shows how to remove and replace the front headlamp on a Jeep Grand Cherokee, following the instructions below. First, open the bonne…
How to replace the front headlamp bulb on the Jeep Grand Cherokee?
How to replace the front headlamp bulb on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the front headlamp bulb on the Jeep Grand Cherokee, there are two methods: the first, simpler method, involves removing the circular cover…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos