Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlamp on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee ZJ, MK 1, ZG - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Headlight

See other generations:
Video tutorial

This brief guide shows how to remove and replace the front headlamp on a Jeep Grand Cherokee, following the instructions below. First, open the bonnet and start unscrewing the screws found above and below the headlamp (right inside the gap); then disconnect the electrical connector of the bulb, located at the back, as shown in the video.

At this point, replace the optical unit with a new one, using the original part; now reassemble the front headlamp by applying the reverse procedure!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight on a Jeep Grand Cherokee
How to Replace the Headlight on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the headlight on a Jeep Grand Cherokee, open the bonnet and locate the rear of the affected light cluster. Remove any covers or protective…
Replacing Front Headlamp on Grand Cherokee
Replacing Front Headlamp on Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) How to replace the front bulb of the Jeep Grand Cherokee? First, lift the front bonnet to access the engine compartment, then remove all the covers o…
Guide to Resetting the TPMS Light on a Jeep Grand Cherokee
Guide to Resetting the TPMS Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) This guide provides the main instructions to reset the tyre pressure monitoring system (TPMS) light on a Jeep Grand Cherokee, as well as the Cherokee…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos