Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp on Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

How to replace the front bulb of the Jeep Grand Cherokee? First, lift the front bonnet to access the engine compartment, then remove all the covers of the front headlamp. Reach in and disconnect the bulb from its connector, replacing any damaged bulbs with new ones (same size and voltage).

Alternatively, you can remove the entire front headlamp. After replacing the worn bulbs, prepare to refit the cover of the engine compartment.

Open the wheel arch liner if you wish to replace the other bulbs.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror on the Jeep Grand Cherokee
Replacing the External Wing Mirror on the Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) Today's procedure will show you how to remove and replace the external wing mirror on the Jeep Grand Cherokee. First, open the front door of the vehi…
How to Replace the Front Grille on a Jeep Grand Cherokee?
How to Replace the Front Grille on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the front grille on a Jeep Grand Cherokee, open the bonnet to access the top of the grille. Remove the fixing rivets located at the rear o…
Removing Front Door Panel on Jeep Grand Cherokee
Removing Front Door Panel on Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video, we will see how to remove the front door panel of a 2020 Jeep Grand Cherokee, following these simple instructions. First, open the fro…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos