Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight

See other generations:
Video tutorial

To replace the headlight on a Jeep Grand Cherokee, open the bonnet and locate the rear of the affected light cluster. Remove any covers or protective shields to access the headlight fixings.

Disconnect the main electrical connector, taking care with the locking tabs. Unscrew the bolts or screws that secure the headlight to the bodywork, holding the cluster with one hand to prevent it from falling or hitting.

Once freed from the fixings, gently pull the headlight outwards from the vehicle. Insert the new headlight in the same position, aligning the fittings correctly with the housing, then reconnect the electrical wiring and re-screw all the fixings.

Refit the protective covers and check the correct operation of the lights before closing the bonnet.


Posted on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs …
How to replace the front headlamp on a Jeep Grand Cherokee
How to replace the front headlamp on a Jeep Grand Cherokee
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) This brief guide shows how to remove and replace the front headlamp on a Jeep Grand Cherokee, following the instructions below. First, open the bonne…
Removing the Front Headlamp of a Jeep Grand Cherokee 2
Removing the Front Headlamp of a Jeep Grand Cherokee 2
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this video, you will see how to remove and replace the front headlamp assembly of a second series Jeep Grand Cherokee by following these simple st…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos