Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to replace the headlight bulb on the Jeep Grand Cherokee?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years 2004-2010
Part: Light bulb
Operation: How to replace the headlight bulb on the Jeep Grand Cherokee?

The replacement of the headlight bulb of the Jeep Cherokee is carried out by opening the hood, to have access to the rear part of the headlight corresponding to the bulb to be replaced. Here, there will be a connector that will need to be disconnected, so that the bulb can be pulled out of its housing inside the headlight. At this point it will be possible to connect the new bulb to the connector and insert it inside the headlight. After everything has been correctly installed, you can close the hood and check that the light bulb is working correctly.


Posted on 16 August 2022 by ScegliAuto



How do you replace the headlight bulb on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Replacing the headlight bulb on the Jeep Grand Cherokee is done by opening the bonnet, so that you can access the screws located inside the engine co
How to replace the headlight bulb on the Jeep Grand Cherokee WK2
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Today we will discover the procedure required to remove and replace the headlight bulb of the Jeep Grand Cherokee WK2, in simple steps. First of all,
How to replace the headlight bulb on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In order to replace the headlight bulb of the Jeep Grand Cherokee there are two methods: the first, the simplest one, involves removing the circular

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos