Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Headlight bulb

In this video tutorial, you will find the main instructions for removing and replacing the front headlight bulb on a Jeep Grand Cherokee. First, open and lift the bonnet of your car, and to access the back of the lamp, remove the air filter box by disengaging the levers and taking out the filter; then unscrew the screws to remove the filter box. At this point, pull the bulb out of the lamp and replace it with the correct new one; then, reassemble the air filter box!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs …
How to Remove the Front Bulb from a Jeep Grand Cherokee
How to Remove the Front Bulb from a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before you begin, turn the front wheels of your Jeep Renegade to the right. Start by removing the cover in the front wheel arch. Then, rotate counter…
How to replace the front headlamp on a Jeep Grand Cherokee
How to replace the front headlamp on a Jeep Grand Cherokee
Jeep Grand Cherokee (1992-1998 / ZG, MK 1, ZJ) This brief guide shows how to remove and replace the front headlamp on a Jeep Grand Cherokee, following the instructions below. First, open the bonne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos