Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on the Jeep Grand Cherokee MK4 3.6L V6

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Air filter

See other generations:
Video tutorial

Discover the steps to remove and replace the engine air filter on the Jeep Grand Cherokee MK4 with a 3.6L V6 engine. First, open the bonnet of your car and start by unfastening the side clips of the air filter box; then lift the cover and remove the filter inside, as shown in the video.

At this point, clean the inside of the air filter box, correctly inserting the new filter in the right direction. Now, secure the cover using the appropriate clips!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the 2020 Jeep Grand Cherokee
How to replace the engine air filter of the 2020 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) When the engine of your Jeep Grand Cherokee (year 2020) overheats abnormally even at low speeds, it is likely time to replace the engine air filter. …
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you own a Jeep Grand Cherokee Mk4 and want to learn how to correctly replace the cabin air filter, follow the procedure below. First, reach the pa…
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short video, see how to dismantle and replace the cabin air filter on the fourth series Jeep Grand Cherokee in simple steps. First, get insid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos