Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Centre Trim of the Dashboard and Radio in the Jeep Patriot

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Car stereo

This guide will show you the procedure for removing and replacing the centre trim of the dashboard and the radio in the Jeep Patriot. First, get into the vehicle and start by removing the cover at the base of the gear lever; then pry on the sides of the trim until you can detach and remove it, as illustrated in the video. Next, undo the screws of the radio, disconnecting the electrical connectors found at the back to remove it completely; for reassembly, simply apply the reverse procedure!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Jeep Patriot?
Where is the fuse box located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the box containing the fuses of your Jeep Patriot is located, don't worry because below you will find the steps to follow to …
Replacing the Cabin Air Filter on a Jeep Patriot
Replacing the Cabin Air Filter on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Here are the instructions for replacing the cabin air filter on a Jeep Patriot. First, open the driver's side front door and begin lowering and relea…
How to Find the Fuse Diagram for a 2016 Jeep Patriot
How to Find the Fuse Diagram for a 2016 Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this video tutorial, you can see how to locate the fuse boxes and understand their diagrams in a 2016 Jeep Patriot. The first fuse box shown is lo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos