Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear headlamp bulbs on the Jeep Grand Cherokee is a straightforward and quick task. First, open the boot.

Then, remove the two retaining rivets of the headlamp using a flat-head screwdriver. Once done, grasp the headlamp and pull it out from the bodywork towards you. To replace a faulty bulb, simply remove the bulb holder from the housing by turning it approximately 45 degrees counterclockwise.

To refit, turn it clockwise.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…
How to Remove the Rear Light from a Jeep Grand Cherokee
How to Remove the Rear Light from a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) How do you remove the rear light from the Grand Cherokee? Open the tailgate and remove the rear light. Lift the boot lid of the luggage compartment, …
How to Replace the Brake and Indicator Bulbs on a Jeep Grand Cherokee?
How to Replace the Brake and Indicator Bulbs on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video, see how to replace the brake and indicator bulbs on a Jeep Grand Cherokee, a very simple and quick operation. After obtaining the corr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos