Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Indicator Bulbs on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Tail light bulb

In this video, see how to replace the brake and indicator bulbs on a Jeep Grand Cherokee, a very simple and quick operation. After obtaining the correct replacement bulbs, ensure the key is not in the ignition and open the tailgate. Since the headlamp must be removed first, remove the two fixing rivets using a flat-head screwdriver or a plastic spatula. Once done, disengage the headlamp from the bodywork and extract the bulb by turning the holder anti-clockwise. Refit the replacements by following the reverse procedure.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Indicator Bulb on the Jeep Grand Cherokee
How to Replace the Rear Indicator Bulb on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video, the process of removing and replacing the rear indicator bulb on the Jeep Grand Cherokee is demonstrated. First, open the boot lid …
Replacing the Third Brake Light Bulb on a Jeep Grand Cherokee
Replacing the Third Brake Light Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Today, in this video tutorial, you will learn how to remove and replace the third brake light and its bulbs on a Jeep Grand Cherokee. First, open the…
How to Replace the Brake Pump on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) In this short video tutorial, you will see how to replace the brake pump on a second-generation Jeep Grand Cherokee, produced from 1998 to 2004. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos