Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to disable start & stop on 2020 Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Operation: How to disable start & stop on 2020 Jeep Grand Cherokee

In today's video tutorial we will see how to permanently deactivate the start & stop on a Jeep Grand Cherokee, but also on most models of the FCA group. To definitively deactivate our start & stop system we will directly disconnect the power supply of the system control unit; to do this we remove the plastic cover that we find under the rear mat, on the right side, and we go to disconnect the electrical connector that we find on the battery pole, as shown in the video. In this way we will have disabled the sensor of our start & stop system!


Posted on 31 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What to do when you have trouble starting on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - What problems does the Jeep Grand Cherokee Crd have? Read Answer
    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee 3 0? Read Answer
    • Grand Cherokee 2010-2021 - What are the problems of the Jeep Grand Cherokee 3.0 CRD? Read Answer
    • Grand Cherokee 2004-2010 - What is the cost of the service on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1992-1998 - Where is the chassis of a Jeep Grand Cherokee located? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos