Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear light bulbs in the Jeep Grand Cherokee, a very simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the trunk door, locate the two screws positioned along the inner edge of the headlight in question and unscrew them using a simple cross-tip screwdriver.

Then, grab the headlight, pull it outwards and separate it from the body. At this point, all that remains is to disconnect the power connector, replace the faulty bulbs, and reassemble everything following the reverse procedure.


Posted on 27 June 2025 by ScegliAuto


Related tutorials

Replacing the Third Brake Light Bulb on a Jeep Grand Cherokee
Replacing the Third Brake Light Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Today, in this video tutorial, you will learn how to remove and replace the third brake light and its bulbs on a Jeep Grand Cherokee. First, open the…
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…
How to Replace the Rear Headlamp Bulb on a Jeep Grand Cherokee
How to Replace the Rear Headlamp Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the rear headlamp bulb, open the boot to access the two screws that secure the lamp near the boot seal. Once the two screws are loosened, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos