Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulb, open the boot to access the two screws that secure the lamp near the boot seal. Once the two screws are loosened, you can remove the lamp from its housing.

This allows you to disconnect the connectors at the back and pull out the corresponding bulbs. These can now be replaced with new spare parts; after replacement, reconnect the connectors and secure the lamp with its screws.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…
How to Replace and Install the Indicator Bulb in the External Mirror of a Jeep Grand Cherokee
How to Replace and Install the Indicator Bulb in the External Mirror of a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The instructions in this guide will show you how to replace and install the indicator bulb in the external mirror of a Jeep Grand Cherokee. First, mo…
How to Replace the Rear Headlamp Bulbs on the Jeep Grand Cherokee?
How to Replace the Rear Headlamp Bulbs on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Replacing the rear headlamp bulbs on the Jeep Grand Cherokee is a straightforward and quick task. First, open the boot. Then, remove the two retainin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos