Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Replace the Jeep Grand Cherokee's bonnet hydraulic pistons

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WJ, MK 2 - Years 1998-2004
Part: Hydraulic pistons
Operation: Replace the Jeep Grand Cherokee's bonnet hydraulic pistons

Let's see in this short and simple guide how to replace the hydraulic pistons of the Jeep Grand Cherokee bonnet. First we open the bonnet of our car and start by holding our bonnet up; then we use a thin lever or something pointed to start unhooking the hydraulic piston on the top, as shown in the video. At this point, remove the piston from the lower part and replace it with the new one, having the same length, fixing it correctly on the hooks; we carry out the same operation to replace the other hydraulic piston!


Posted on 21 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos