Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Key

If the smart key of your new Jeep Cherokee has suddenly stopped working, it likely has a completely drained battery. Therefore, it is essential to replace it. Below, you will find how to do this quickly and safely. First, locate and press the small button on the top of the cover. Remove the physical emergency key and then open the cover using a flat screwdriver to access the button cell battery inside. Replace it with a new battery. Finally, reassemble everything correctly.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Remote Battery for Jeep Cherokee
Replace Remote Battery for Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Is the battery of your Jeep Cherokee flat and needs replacing? Here's how to do it. Open the Jeep remote. Remove the metal key. Once the metal key is…
How to Replace the Remote Battery of the Jeep Cherokee?
How to Replace the Remote Battery of the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the battery of the Jeep Cherokee remote, move the lever located at the top of the device to extract the key. Once the key is removed, leve…
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos