Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin air filter located on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Cabin air filter

The cabin air filter in the Jeep Grand Cherokee is positioned inside the cabin, not in the typical compartment in front of the windscreen. To access it, first open the glove compartment on the passenger side and unclip the right cord that limits its travel. Then, after removing the drawer by pulling the pins from their respective slots, you will notice a long rectangular plastic cover with a clip on the left end. Press the clip while pulling the cover. At this point, you will have the cabin air filter in front of you, ready to be cleaned or replaced as needed.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide, you will learn how to remove and replace the cabin air filter on the Jeep Grand Cherokee in simple steps. First, open the front passen…
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short video, see how to dismantle and replace the cabin air filter on the fourth series Jeep Grand Cherokee in simple steps. First, get insid…
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To replace the cabin air filter in your 2021 Jeep Grand Cherokee, follow these steps. First, go to the passenger side and open the glove compartment.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos