Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Jeep Cherokee XJ

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Diesel fuel filter

See other generations:
Video tutorial

In today's tutorial video, learn how to remove and replace the fuel filter on the second series Jeep Cherokee XJ in simple and quick steps. First, lift the vehicle and locate the fuel filter; then disconnect the two hoses entering and exiting the filter by loosening the metal clamps, as shown in the video.

At this point, drain any excess fuel into a container, then replace the diesel filter; check that the hoses are in good condition and subsequently reassemble the fuel filter!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Jeep Cherokee?
How to Replace the Fuel Filter on a Jeep Cherokee?
Jeep Cherokee (1984-2001 / MK 2, XJ) In this video, see how to replace the fuel filter on a Jeep Cherokee, a very simple and quick operation. First, open the fuel tank cap to release som…
How to Open the Fuel Flap on a Jeep Cherokee?
How to Open the Fuel Flap on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this tutorial, see how to open the fuel flap on a Jeep Cherokee, a very simple operation that is similar to the typical procedure for most vehicle…
How to Open the Fuel Flap on the Jeep Cherokee?
How to Open the Fuel Flap on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To open the fuel flap on the Jeep Cherokee, press the button located in the centre of the driver's door, just below the internal handle: pressing thi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos