Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switches from the Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Power window switch

See other generations:
Video tutorial

Today, you will see in this video tutorial how to remove and replace the window switch panel of the Jeep Cherokee in simple and quick steps. First, open the front door and start by removing the door panel; to do this, unscrew the screws found on it, as shown in the video.

Next, disconnect the handle cable and the electrical connector of the window switch panel; then unclip the switch panel to remove it from the door panel by unscrewing the screws with a cross-head screwdriver. Now, replace the switch panel and reassemble the door panel!


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Replacing the Window Seal on a Jeep Cherokee
Replacing the Window Seal on a Jeep Cherokee
Jeep Cherokee (1984-2001 / MK 2, XJ) In this video tutorial, you will see the essential steps to remove and replace the window seal of the windows on a second series Jeep Cherokee. First…
Where is the fuse box in the Jeep Cherokee?
Where is the fuse box in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The fuses in the Jeep Cherokee are located inside the designated fuse boxes within the vehicle: this model has two. The first is positioned behind th…
How to Remove the Door Panel and Handle of the Jeep Cherokee
How to Remove the Door Panel and Handle of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) These brief steps will show you how to remove and replace the door panel and handle of the Jeep Cherokee. First, open the front door and begin to dis…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos