Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Gladiator
    4. : Jeep Gladiator dashboard speaker replacement

Jeep Gladiator - Video tutorial

Model: Jeep Gladiator JT - Years 2020-2024
Part: Loudspeaker
Operation: Jeep Gladiator dashboard speaker replacement

Let's find out in this short and simple guide how to disassemble and replace the speakers located on the dashboard of the Jeep Gladiator. First we get on board the car and start removing the plastic speaker grille, using a thin lever; then we unscrew the two fixing screws of the case, using a 10 mm star wrench or a cross screwdriver, as shown in the video. At this point we disconnect the electrical connector to remove and replace the speaker with the new one, of the right type, following the video tutorial to the end!


Posted on 19 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos