Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to reset the Jeep Grand Cherokee screen?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: -board computer
Operation: How to reset the Jeep Grand Cherokee screen?

If we have noticed that the touch display of our car's on-board computer does not turn on and does not let us carry out any operations, in the description below we will find useful indications and information to be able to unlock it. The operation to carry out is to disconnect the battery for a few minutes. On this car model, the battery is located under the passenger side seat, so to access it, slide the seat forward and remove the plastic panel located on the floor under the seat itself. Under this panel we will find the battery and we will first disconnect the negative pole and then the positive one. Wait 10 minutes and then reconnect the positive pole first and then the negative one and check if the touch screen is now working.


Posted on 10 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Grand Cherokee 2010-2021 - Why doesn't Start & Stop work on Jeep Grand Cherokee? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos