Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

Video tutorial

To remove the door panel on a Jeep Renegade, you need to loosen the screws that secure it to its housing: these are located in the central part of the window switch panel and in the central lower part of the panel itself. Once the screw on the window switch panel has been loosened, detach the entire switch panel and disconnect its connector, so you can completely remove the panel as well.

Now, you can insert the new panel and secure it with the previously removed screws, also installing the switch panel.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Remove the Front Door Panel on Jeep Renegade
Remove the Front Door Panel on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located …
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
Removing the Door Panel (Right Side) on a Jeep Renegade
Removing the Door Panel (Right Side) on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Perform the removal of the door panel (front right) on a Jeep Renegade: disconnect the battery terminals located in the engine bay, use a screwdriver…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos