Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel (Right Side) on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

Video tutorial

Perform the removal of the door panel (front right) on a Jeep Renegade: disconnect the battery terminals located in the engine bay, use a screwdriver to remove the screws in the space of the upper door opening lever, the screws in the handle, and the side screws on the panel.

Remove the plastic from the handle and the switch panel (disconnect the power terminals), unscrew the remaining screws on the door panel and detach the retaining clips.

Finally, pull off the panel with your hands and unclip it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Door Panel on the Jeep Renegade
How to Remove and Replace the Door Panel on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today's guide will show you how to remove and replace the front door panel of the Jeep Renegade. First, open the door and start unscrewing all the fi…
Remove the Front Door Panel on Jeep Renegade
Remove the Front Door Panel on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located …
Guide to replacing the speakers in the Jeep Renegade
Guide to replacing the speakers in the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide we will see the main instructions on how to disassemble and replace the front door speaker of the Jeep Renegade. First, we open the fro…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos