Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Jeep Gladiator

Model: Jeep Gladiator JT - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

Video tutorial

If you intend to replace a headlight bulb on this vehicle and perhaps install an equivalent LED model, the following description provides the procedure and steps to follow for this upgrade. Once you open the hood, get a screwdriver to remove the retaining clips in the panel above the grille, then remove the grille.

This will give you access to the screws securing the headlight around it. After removing the screws, you can pull out the headlight assembly and remove the rear cover to access the electrical connector, which you can disconnect to remove the bulb and replace it with the new one. Then proceed to reassemble all components in reverse order.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Jeep Gladiator
How to Replace the Headlight Bulb on a Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) To replace the headlight bulb on a Jeep Gladiator, open the hood to loosen all the screws securing the front grille from the top. Once these screws a…
How to Replace the Rear Headlight Bulbs in the Jeep Gladiator?
How to Replace the Rear Headlight Bulbs in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) As shown in this tutorial, replacing the rear headlight bulbs in the Jeep Gladiator is a very simple and quick task. First, ensure the key is not in …
How to Remove the Front Door Panel of the Jeep Gladiator
How to Remove the Front Door Panel of the Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) In this guide, we will go through the necessary steps to remove and replace the front door panel of the Jeep Gladiator. First, open the front door an…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos