Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs in the Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Tail light bulb

As shown in this tutorial, replacing the rear headlight bulbs in the Jeep Gladiator is a very simple and quick task. First, ensure the key is not in the ignition for safety, then open the tailgate and unscrew the two headlight mounting bolts with an 8mm socket wrench. Next, grasp the headlight and pull it towards you, freeing it from the body. At this point, you can remove the bulb to be replaced by turning it slightly counterclockwise, and reassemble everything by following the reverse procedure.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Lights on a Jeep Gladiator?
How to Replace the Tail Lights on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial, you will see how to replace the tail lights on a Jeep Gladiator, a very simple operation. First, ensure the vehicle is off for safe…
How to Replace the Taillights on the Jeep Gladiator?
How to Replace the Taillights on the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial, you will see how to replace the taillights on the Jeep Gladiator, a very simple and quick operation. First, ensure that the key is …
How to Replace the Headlight Bulb on a Jeep Gladiator
How to Replace the Headlight Bulb on a Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) To replace the headlight bulb on a Jeep Gladiator, open the hood to loosen all the screws securing the front grille from the top. Once these screws a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos