Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Jeep Gladiator

Model: Jeep Gladiator JT - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on a Jeep Gladiator, open the hood to loosen all the screws securing the front grille from the top. Once these screws are loosened, completely remove the grille to access the screws underneath. These screws must then be loosened to extract the headlight and disconnect its rear connector: this will allow you to remove the old bulb from its socket and replace it with a new replacement part.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulbs in the Jeep Gladiator?
How to Replace the Rear Headlight Bulbs in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) As shown in this tutorial, replacing the rear headlight bulbs in the Jeep Gladiator is a very simple and quick task. First, ensure the key is not in …
How to Replace a Headlight Bulb on a Jeep Gladiator
How to Replace a Headlight Bulb on a Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) If you intend to replace a headlight bulb on this vehicle and perhaps install an equivalent LED model, the following description provides the procedu…
How to Replace the Air Filter on a Jeep Gladiator?
How to Replace the Air Filter on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) To replace the air filter on a Jeep Gladiator, open the hood to access the components inside. The filter box is located in the lower left area of the…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos