Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: License plate light

Video tutorial

In today's video, we will see how to replace the number plate bulbs on a Jeep Renegade. First, obtain the correct units, specifically the W5W. If you prefer, you can install LED units, which should have a canbus resistor to avoid issues on the instrument panel.

Using a flathead screwdriver, detach the plastic cover from its housing. Once done, extract the blown bulb by unscrewing it carefully, then insert the new unit.

Test if it works correctly, and if it does, you can reassemble everything.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…
How to Replace the Number Plate Lights on the Jeep Renegade
How to Replace the Number Plate Lights on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of th…
Replacing the Number Plate Lights on a Jeep Renegade
Replacing the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, learn how to replace the number plate bulbs on a Jeep Renegade. Use a screwdriver to remove the number plate light unit located in the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos