Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold and Adjust the Wing Mirrors on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Side mirror

In this video tutorial, see how to fold and adjust the wing mirrors on a Jeep Renegade by following these simple steps: first, adjust manually by pressing on the reflective surface at the points indicated by the arrows (see video). Then, for electric adjustment: get into the vehicle, turn on the ignition, and select the desired mirror using the control near the driver's door armrest. If the control is set to position 1, select the left mirror; if set to position 2, select the right mirror. To orient the mirror, press the button in the four directions indicated by the arrows. Once the adjustment is complete, turn the control to position 0.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Automatically Fold the Mirrors on a Jeep Renegade
How to Automatically Fold the Mirrors on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this short and simple guide, you will learn how to automatically fold and unfold the electric exterior mirrors on a Jeep Renegade by following the…
How to Fold the Mirrors of the Jeep Renegade
How to Fold the Mirrors of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The exterior mirrors fold in automatically when you lock the car with the transponder key and unfold when you unlock the vehicle with the key. You ca…
How to Fold the Mirrors on the Jeep Renegade
How to Fold the Mirrors on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To adjust the mirrors on the Jeep Renegade, operate the selector located on the driver's door. Unlike other vehicles, you cannot open and close the m…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos