Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Air filter

The air filter in your Jeep Renegade ensures a clean airflow to the engine and must be replaced periodically. To change it, start by opening the bonnet: the box containing the filter is located on the left side, at the top. Disconnect the tube marked with a yellow clip and the sensor connection, which is located lower down. Using a long screwdriver, unscrew the three screws that secure the box cover, and by removing it, you gain access to the filter element. Replace the filter and refit the cover with its screws, reconnect the sensor, and reattach the tube.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Jeep Renegade Hybrid?
How to Reset the Service Light in a Jeep Renegade Hybrid?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In the attached tutorial video, we find the explanation regarding the method to clear the service light for various Jeep car models, including the Je…
How to replace the air filter of the Jeep Renegade
How to replace the air filter of the Jeep Renegade
Jeep Renegade (2014-2023 / ) In this new mini guide of ours, we will discover together the various steps that you need to follow if you want to replace the engine air filter of y…
Oil Filter Replacement on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the oil filter on a Jeep Renegade, follow these steps. Lift the car on a jack and undo the bolt of the oil sump; let the fluid drain into …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos