Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Interior Lights

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

Video tutorial

Installing LED interior lights will certainly give the vehicle a more modern and appealing look while ensuring better illumination of the interior. You can purchase specific kits in the aftermarket that already include both the quantity and model of bulbs needed for this aesthetic upgrade.

Start with the lights in the ceiling-mounted light fixtures, then move on to the boot light, the number plate lights, and finally remove the rear lights to install LED bulbs for the reversing lights as well.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Jeep Patriot
Replacing the Cabin Air Filter on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Here are the instructions for replacing the cabin air filter on a Jeep Patriot. First, open the driver's side front door and begin lowering and relea…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Jeep Patriot (2007-2017 / MK 1) The cabin air filter for the car model in question is located on the passenger side, behind the glove compartment: to access the air duct and thus th…
Replacing the Number Plate Lights on a Jeep Patriot
Replacing the Number Plate Lights on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today we will discover the instructions that will allow you to dismantle and replace the number plate bulbs on a Jeep Patriot in simple and quick ste…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos