Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

Video tutorial

The cabin air filter for the car model in question is located on the passenger side, behind the glove compartment: to access the air duct and thus the filter housing, open the glove compartment door, press the sides to retract the end stop pins, and fully tilt it down; at this point, press the side tabs that secure the cabin air filter cover and remove it to extract the old filter, clean any dirt residue, and insert the new one (activated carbon type is recommended) orienting it according to the direction of the airflow.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Jeep Patriot
Replacing the Cabin Air Filter on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Here are the instructions for replacing the cabin air filter on a Jeep Patriot. First, open the driver's side front door and begin lowering and relea…
Replacing the Thermostat on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) If the engine coolant temperature suddenly rises, the cause may be a stuck thermostat due to rust, preventing water circulation in the engine block. …
Where is the Oil Filter Located on the Jeep Patriot?
Where is the Oil Filter Located on the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) In this video, you will see where the oil filter is located on the Jeep Patriot and how to proceed if you need to replace it. This operation is obvio…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos