Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Light on a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Side marker bulb

Video tutorial

In this tutorial, you will see how to replace the mirror light on a Jeep Renegade, a very simple and quick operation. First, bring the mirror to its maximum opening, then, using a plastic spatula to avoid leaving marks, pry in the indicated gap and release the outer cover.

Next, locate the retaining clip for the light located on the underside, unlock it and separate the light from the base. At this point, simply remove the bulb, connect the replacement, and follow the reverse procedure.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Remove the External Mirror on a Jeep Renegade
How to Remove the External Mirror on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Learn how to remove the mirror from the external mirror assembly of a Jeep Renegade. Using a lever (plastic cover), pry between the perimeter of the …
How to Remove the Third Brake Light on a Jeep Renegade
How to Remove the Third Brake Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide, follow the instructions to remove the third brake light on the Jeep Renegade in simple steps. First, open the boot and get a 10 mm spa…
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos