Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Alternator Pulley on a Jeep Compass 2.0 MultiJet

Model: Jeep Compass 552, MK 2 - Years 2016-2025

Today's main instructions will show you the procedure for removing and replacing the alternator pulley on a Jeep Compass 2.0 MultiJet in simple steps. First, raise the vehicle and start by disconnecting the serpentine belt; then unscrew the nut of the alternator pulley, disconnecting all associated components as shown in the video. At this point, replace and install the new alternator pulley, securing it properly and then installing the new original alternator belt, following the video tutorial to the end!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Jeep Compass Multijet
Replacement of the timing belt of the Jeep Compass Multijet
Jeep Compass (2016-2025 / 552, MK 2) Let's discover the information that will allow us to dismantle and replace the timing belt of the Jeep Compass, with a diesel engine (Multijet). To a…
Alternator Replacement on a Jeep Compass
Alternator Replacement on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Is the alternator broken and needs replacing? Let's look at the alternator replacement on a Jeep Compass. Lift the bonnet and secure it, locate the b…
How to Replace the Timing Belt of the Jeep Compass Mk1
How to Replace the Timing Belt of the Jeep Compass Mk1
Jeep Compass (2006-2016 / MK 1, MK 49) This guide shows how to replace the timing belt of the Jeep Compass. After safely lifting the front of the vehicle, remove the right wheel and open t…

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the Stop and Start service not available on the Jeep Compass? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos